Yes, hydraulic fracturing is being used extensively in Canada and is increasingly being used in countries in Asia, Europe, and South America.Learn more:
Conducted properly, hydraulic fracturing (or “fracking”) has little possibility of contaminating water supplies.
Most of the water and additives used in hydraulic fracturing (or “fracking”) remain deep underground in the geologic formation from which the oil or gas is being extracted.
An area undergoing production of oil or gas using hydraulic fracturing technology shares many features with areas where conventional oil or gas is being developed, including:
In a conventional oil or gas field, where the oil or gas is in relatively porous and permeable rock (i.e. the pores are connected), the oil or gas can usually flow naturally from the reservoir rock to the wellbore.
Reports of hydraulic fracturing causing felt earthquakes are extremely rare.
There isn’t really a “typical” fractured well because the amount of water used depends on the rock formation, the operator, whether the well is vertical or horizontal, and the number of portions (or stages) of the well that are fractured.
The actual practice of hydraulic fracturing (or “fracking”) is only a small part of the overall process of drilling, completing, and producing an oil and gas well.
Hydraulic fracturing, informally referred to as “fracking,” is an oil and gas well development process that typically involves injecting water, sand, and chemicals under high pressure into a bedrock formation via the well.
In general, hydraulic fracturing fluid is composed of water, proppant (typically sand), and chemicals. A public Web site known as FracFocus has b
- 1 of 2
- next ›