It isn't that simple. There is not one magnitude above which damage will occur.
On January 19, 1968, a thermonuclear test, codenamed Faultless, took place in the Central Nevada Supplemental Test Area. The codename turned out to be a poor choice of words because a fresh fault rupture some 1200 meters long was produced.
No. Neither the USGS nor any other scientists have ever predicted a major earthquake. We do not know how, and we do not expect to know how any time in the foreseeable future.
No. Of more than 150,000 Class II injection wells in the United States, roughly 40,000 are waste fluid disposal wells for oil and gas operations.
How are earthquakes recorded? How are earthquakes measured? How is the magnitude of an earthquake determined?
Earthquakes are recorded by a seismographic network. Each seismic station in the network measures the movement of the ground at the site. The slip of one block of rock over another in an earthquake releases energy that makes the ground vibrate.
Estimate what EQ of what size are likely to occur (geology)Given the EQ size we then estimate what the shaking will be (seismology)Given the shaking estimate the response of different types of buildings (EQ engineering).
A fault is a fracture or zone of fractures between two blocks of rock. Faults allow the blocks to move relative to each other. This movement may occur rapidly, in the form of an eart
What is a seismic zone, or seismic hazard zone? Where can I find information on seismic zones 0, 1, 2, 3, or 4? What seismic zone is location X in?
A seismic zone could be one of three things:
Although earthquake magnitude is one factor that affects tsunami generation, there are other important factors to consider. The earthquake must be a shallow marine event that displaces the seafloor.
Those estimates can be found on our Earthquake Statistics website.
- 1 of 12
- next ›